● For details on how to set up parameters, refer to "12.6.2 Setting Parameters with GM
Programmer".
■
T
ypes of capture function
Capture function
● The count value at the point in time when the input signal from an external device changes is
stored in the capture 0 value or capture 1 value register.
Sampling capture function
●
The count value when the specified sampling time elapses after the input signal from an
external device changes is stored in the capture 0 value and capture 1 value registers.
● The count value equivalent to the sampling time can be monitored by reading the capture
differential value.
12.6 High-speed Counter Function
WUME-GM1RTXOP-01 12-49
To Next Page
Loading...
