Select the "General" tab and set appropriate values for each item.
Item Description
Slave address [1..247] Specifies the address (station number) of the slave device
Response timeout (ms)
[2..65535]
Waiting time for response from slave
* The response timeout value for the master device is overwritten.
10. Select the "Modbus Slave Channel
" tab.
11. Click the [Add Channel
] button.
The "Modbus Channel" dialog box will be displayed.
Enter information for channels to be used. Up to 100 channels can be set.
13.3 MODBUS
13-34 WUME-GM1RTXOP-01
To Next Page
Loading...
