Adding devices
Add an EtherNet/IP scanner device and remote adapter device to the Device tree, as described
below
.
1. Add an EtherNet/IP scanner device.
1-1 Right-click the
"LANPort2" object in the navigator pane and then select "Add
Device" from the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
1-2 Select "EtherNet_IP_Scanner
" and click the [Add Device] button.
Image of added device and tasks
After an EtherNet/IP scanner device has been added, a device and tasks are added to the
Device tree, as shown below
.
13.4 EtherNet/IP
WUME-GM1RTXOP-01 13-43
To Next Page
Loading...
