1. Click the "Pin assignment " icon on the toolbar.
The pin assignment setting input window will be displayed.
2. Double-click the row of the pin number to be set.
The function selection window will be displayed.
3. Select a function to be assigned to the pin for each control mode and a contact method
(only when an input function is selected).
4. In the function selection window
, click the [OK] button.
The display will be returned to the pin assignment setting input window.
5. Click the [Apply] button.
15.7 Parameter Window
WUME-GM1RTXOP-01 15-29
To Next Page
Loading...
