Panasonic KX-NS1000 - Page 1052

Delay Time After Connected Received for Incoming (0-10 s)
Specifies the length of time (in seconds) that the system waits after the line is connected for incoming calls
before playing the prompt.
Default
1 s
Value Range
0–10 s
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
Feature Manual References
20.1.82 Unified Messaging—System Prompts
Delay Time After Connected Received for Outgoing (0-10 s)
Specifies the length of time (in seconds) that the system waits after the line is connected for outgoing calls
before playing the prompt.
Default
1 s
Value Range
0–10 s
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
Feature Manual References
20.1.82 Unified Messaging—System Prompts
System Guidance—System Guidance
Specifies
the parameters which vary depending on the language assigned as the System Guidance language.
For each selection of this setting, related items within "System Guidance 1–8" can be set.
Default
Guidance No. 1
Value Range
Guidance No. 1–8
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
1052 PC Programming Manual Document Version 2016-03
24.4 UM Configuration—[5-4] System Parameters—Parameters