PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting— Primary Language
System Guidance—Select Language—Position of "AM/PM" in Time Stamp
Specifies the position of the "AM/PM" announcement.
Default
After
Value Range
Before: the system announces "AM/PM" before the time, such as P.M. 3:42.
After: the system announces "AM/PM" after the time, such as 3:42 P.M.
24-h: the system announces the time in 24-h format, such as 15:42.
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
System Guidance—Select Language—"O’clock" Prompt
Specifies when and if
"O’clock" is announced.
Default
When at :00
Value Range
When at :00: the system announces "O’clock" only on the hour, such "one o’clock".
Always: the system announces "O’clock" always.
None: No announcement
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
System Guidance—Select Language—Month/Day Prompt
Specifies the order of the month and day for date announcements.
Default
MM:DD
Value Range
MM:DD: Month and Day
DD:MM: Day and Month
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
Document Version 2016-03 PC Programming Manual 1053
24.4 UM Configuration—[5-4] System Parameters—Parameters
To Next Page
Loading...
