Panasonic KX-NS1000 - Page 1073

N: Telephone Number Dialing
A: Feature Access Code
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
Outside Transfer Sequence—EFA Transfer Reconnect Sequence on Busy (Up
to 16 digits / [0
-9 * # D F R T , ; N A])
Specifies the sequence the system uses to reconnect the line when the party transferred with EFA (External
Feature Access) is busy. This setting should match the settings of the PBX.
Default
FA
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialing
A: Feature Access Code
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration
—[5-4] System Parameters—Parameters
Outside Transfer Sequence—EFA
Transfer Reconnect Sequence on No Answer
(Up to 16 digits / [0-9 * # D F R T , ; N A])
Specifies the sequence the system uses to reconnect the line when the party transferred with EFA (External
Feature Access) does not answer. This setting should match the settings of the PBX.
Default
FA
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialing
A: Feature Access Code
0–9, , #: Dial Code
Document Version 2016-03 PC Programming Manual 1073
24.4 UM Configuration—[5-4] System Parameters—Parameters