Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
WAN->LAN Basic Policy
Selects whether to accept or discard packets as the basic policy from WAN to LAN or not.
If Discard is selected, all packets from WAN to LAN are intercepted.
Default
Discard
Value Range
Accept, Discard
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Entry No.
Selects the packet filter number. Once the Entry No. is selected, all following items on this screen can be
programmed for that packet filter.
Default
1
Value Range
1–64
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Filter
Selects whether to specify the packet filtering function.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Protocol Number
Selects the protocol type or the protocol number
(0–255).
Document Version 2016-03 PC Programming Manual 1141
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
To Next Page
Loading...
