Panasonic KX-NS1000 - Page 1142

Default
ANY
Value Range
ANY, Protocol Name, Other ( 0 - 255 )
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Protocol Number—Protocol Name
Selects the protocol type.
If you did not select Protocol Name as Protocol Number, this item is grayed out.
Default
TCP
Value Range
ICMP, TCP, UDP, TCP&UDP
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Protocol Number—Other ( 0 - 255 )
Specifies the protocol number.
If Other ( 0 - 255 ) is not selected for Protocol Number, this item is grayed out.
Default
Blank
Value Range
Blank, 0–255
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—TCP/UDP Source Port
Selects the method of specifying the TCP/UDP Source Port.
If ICMP is selected for Protocol Number—Protocol Name, this item is grayed out.
Default
ANY
Value Range
ANY, Protocol Name, Port Number
1142 PC Programming Manual Document Version 2016-03
27.8 Router Configuration—Firewall—[2-2] Packet Filtering