Filter—Source
Selects the method of specifying the source packet.
Default
ANY
Value Range
ANY, Address, Subnet
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Source—IP Address
Specifies the IP address.
If ANY is selected for Source, this item is grayed out.
Default
Blank
Value Range
Blank, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Source—Subnet Mask
Specifies the subnet mask.
If Subnet is not selected for Source, this item is grayed out.
Default
Blank
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.8 Router Configuration
—Firewall—[2-2] Packet Filtering
Filter—Destination
Selects the method of specifying the destination packet.
Default
ANY
Value Range
ANY, Address, Subnet
Document Version 2016-03 PC Programming Manual 1145
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
To Next Page
Loading...
