Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Timer Settings—VPSS Path Established Timer (s)
Specifies the maximum time for establishing a VPSS path.
If the value set is outside of the value range below, 1 or 86400 is displayed.
This setting is not displayed when connecting to the Slave unit directly, or if changing sites when connected
to the Master unit.
Default
60
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
Timer Settings—Creating Site Response Wait Timer (s)
Specifies the maximum waiting time to respond to the request for creating a VPN site.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
10
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
Timer Settings—Tunnel Established Timer (s)
Specifies the maximum time to establish a VPN tunnel.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
60
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
1150 PC Programming Manual Document Version 2016-03
27.9 Router Configuration—VPN—[3-1] VPSS
To Next Page
Loading...
