Timer Settings—Creating Site Completion Wait Timer (s)
Specifies the maximum waiting time to finish creating a VPN site.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
300
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
Timer Settings—Deleting Site Response Wait Timer (s)
Specifies the maximum waiting time to respond to the request for deleting a VPN site.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
10
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
Timer Settings—Deleting Site Completion Wait Timer (s)
Specifies the maximum waiting time to finish deleting a VPN site.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
60
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration
—VPN—[3-1] VPSS
Timer Settings—Changing Static IP Address Additional Timer (s)
Specifies the maximum time to finish creating a VPN site when changing the static IP address of the WAN
port.
If the value set is outside of the value range below, 1 or 86400 is displayed.
Default
600
Document Version 2016-03 PC Programming Manual 1151
27.9 Router Configuration—VPN—[3-1] VPSS
To Next Page
Loading...
