Panasonic KX-NS1000 - Page 1250

• 10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR— Transfer
to CO
• 10.9 PBX Configuration—[2-9] System—System Options—Option 2— CO - CO Call Limitation—After
Conference
• 10.9 PBX Configuration
—[2-9] System—System Options—Option 3
–
Confirmation Tone—Tone 4-1 : Start Conference
– Confirmation Tone—Tone 4-2 : Finish Conference
– Echo Cancel—Conference
• 12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button— Type
• 12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button— Type
Feature Manual References
4.1.18 Conference
Conference Group Call
• 10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous— Conference Group
Call—Ring Duration
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main—Features—
Conference Group
Call Operation
• 10.7.1 PBX Configuration—[2-7-1] System—Class of Service
—COS Settings—Miscellaneous—
Conference Group Call Operation
• 11.9 PBX Configuration
—[3-9] Group—Conference Group
• 11.9.1 PBX Configuration—[3-9] Group—Conference Group—Member List
Feature Manual References
4.1.19 Conference Group Call
Confirmation Tone
• 10.9 PBX Configuration—[2-9] System—System Options—Option 3
–
Confirmation Tone—Tone 1 : Called by Voice
– Confirmation Tone—Tone 2 : Paged / Automatic Answer
– Confirmation Tone—Tone 3-1 : Start Talking after Making Call / Call from DOORPHONE
– Confirmation Tone—Tone 3-2 : Start Talking after Answering Call
– Confirmation Tone—Tone 4-1 : Start Conference
– Confirmation Tone—Tone 4-2 : Finish Conference
– Confirmation Tone—Tone 5 : Hold
Feature Manual References
4.1.20 Confirmation Tone
COS (Class of Service)
• 10.7.1 PBX Configuration—[2-7-1] System—Class of Service
—COS Settings
• 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
COS
• 12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings—Main—
COS
Feature Manual References
4.1.22 COS (Class of Service)
CPC (Calling Party Control) Signal Detection
• 9.25
PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—
CPC Signal Detection
Time—Outgoing, Incoming
1250 PC Programming Manual Document Version 2016-03
Feature Programming References