Panasonic KX-NS1000 - Page 1251

Feature Manual References
4.1.23 CPC (Calling Party Control) Signal Detection
CTI (Computer Telephony Integration)
• 9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Dial Information (CTI)
• 10.9 PBX Configuration
—[2-9] System—System Options—Option 6 (CTI)
Feature Manual References
4.1.24 CTI (Computer Telephony Integration)
Data Line Security
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Data Line Security
Set / Cancel
• 12.1.1
PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 2—
Data
Mode
Feature Manual References
5.1.1 Data Line Security
DHCP (Dynamic Host Configuration Protocol) Assignment
• 28.2.1 Network Service—[2-1] Server Feature—DHCP
Feature Manual References
5.1.2 DHCP (Dynamic Host Configuration Protocol) Assignment
Dial Mode Selection
• 9.25 PBX Configuration
—[1-1] Configuration—Slot—Port Property - LCO Port
–
Dialing Mode
– DTMF Width
– Pulse Speed
Feature Manual References
5.1.4 Dial Mode Selection
Dial Tone
• 10.9 PBX Configuration
—[2-9] System—System Options—Option 3
–
Dial Tone—Distinctive Dial Tone
– Dial Tone—Dial Tone for Extension
– Dial Tone—Dial Tone for ARS
Feature Manual References
5.1.5 Dial Tone
Dial Tone Transfer
• 12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
• 12.2.3 PBX Configuration—[4-2-3] Extension
—Portable Station—Flexible Button
Document Version 2016-03 PC Programming Manual 1251
Feature Programming References