Call Transfer Status—Transfer to specified telephone number - 1
If "None"
or "Call screening" is selected for
Call Transfer Status—
Selection, specifying a telephone number
here will transfer the caller to that telephone number.
Note
If
"Call screening" is selected, the transfer destination will hear the call screening prompt before the call is
transferred.
Default
Not stored
Value Range
Max. 32 digits (consisting of 0–9,
, and #)
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Manual References
20.1.14 Unified Messaging
—Call Transfer Scenario
Call Transfer Status—Transfer to specified telephone number 2, 3, 4, 5
(Selection/Other)
If "None" or "Call screening
" is selected for
Call Transfer Status—Selection, and the call could not be
transferred to the number specified in Call Transfer Status—Transfer to specified telephone number -
1, the call will be transferred according to these settings for this scenario, in numerical order of priority.
Note
• This
sequence has higher priority than the alternate extension transfer sequence specified in 24.4 UM
Configuration—[5-4] System Parameters—Parameters—
PBX Environment—Alternate
Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;]).
• If "Call screening" is selected, the transfer destination will hear the call screening prompt before the
call is transferred.
Default
Other
Value Range
Other, Extension, Covering Extension
If "Other" is specified, enter a maximum of 32 digits consisting of 0–
9, , and #.
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Manual References
20.1.14 Unified Messaging
—Call Transfer Scenario
178 PC Programming Manual Document Version 2016-03
8.1.1 Users—User Profiles—Advanced setting
To Next Page
Loading...
