Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Card Type
Indicates the type of virtual card installed
(reference only).
Default
Current Card Type
Value Range
V-SIPGW16, V-IPGW16, V-IPEXT32, V-SIPEXT32, V-IPCS4, V-UTEXT32
Maintenance Console Location
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary
Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Status
Indicates the card status (reference only).
Default
Current status
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card is not communicating with the network.
Pre-Install: A card has been added to the slot.
Maintenance Console Location
9.2 PBX Configuration—[1-1] Configuration
—Slot—Summary
Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
Legacy Gateway 1 Shelf/Legacy Gateway 2 Shelf
Card Type
Indicates the type of card installed (reference only).
Default
Current Card Type
210 PC Programming Manual Document Version 2016-03
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary
To Next Page
Loading...
