Panasonic KX-NS1000 - Page 233

T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Default
Transferred TCF
Value Range
Transferred TCF, Local TCF
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration
—Slot—System Property
DN2IP
Leading Number
Specifies the leading digits in dialed numbers by which to associate calls with the appropriate destination.
Default
No1-10: 1-0
No11-512: Not Stored
Value Range
Max. 30 digits (consisting of 0–
9)
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Remaining Number of Digits
Specifies the number of digits to be dialed following the leading number to access the destination.
Default
29
Value Range
0–29
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration
—Slot—System Property
GW No./GW Group Selection
Specifies the type of destination when making calls: a gateway device or a gateway group.
Default
GW No.
Document Version 2016-03 PC Programming Manual 233
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property