Value Range
GW Group, GW No.
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration
—Slot—System Property
GW Group
Specifies
the number of the destination gateway group. This setting is only available when GW No./GW Group
Selection on this screen is set to GW Group.
Default
1
Value Range
1–256
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
GW No.
Specifies the number of the destination gateway device. This setting is only available when GW No./GW Group
Selection on this screen is set to GW No..
Default
1
Value Range
1–512
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
234 PC Programming Manual Document Version 2016-03
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
To Next Page
Loading...
