Panasonic KX-NS1000 - Page 270

Feature Manual References
18.1.1 Simple Remote Connection
Setting parameters assigned to Remote SIP-MLT—NAT - Keep Alive Packet
Sending Interval Time
(s)
Specifies the time interval between transmissions of the Keep Alive packet.
Note
• This
interval must be shorter than the NAT binding time of the router. The default value is appropriate
in most cases.
• This setting is available only when NAT - Keep Alive Packet Type is set to "Blank UDP".
Default
20 s
Value Range
10–60 s
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Manual References
18.1.1 Simple Remote Connection
Setting parameters assigned to Remote SIP-MLT—NAT - SIP Register Expire
Time (s)
Specifies the length of time that will elapse before the current registration expires.
Note
This setting is available only when NAT - Keep Alive Packet Type is set to "Register".
Default
20 s
Value Range
10–3600 s
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
Feature Manual References
18.1.1 Simple Remote Connection
270 PC Programming Manual Document Version 2016-03
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main