Setting parameters for Networking Survivability, assigned to Remote
SIP-MLT—NAT - CWMP Server IP Address
Specifies
the outside-facing IP address or host name of the PBX-side network gateway for remote connections
that is used when the gateway specified in Setting parameters assigned to Remote SIP-MLT is not available.
Default
Not stored
Value Range
1.0.0.0–223.255.255.255 (IP address), Max. 100 characters (host name)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Manual References
18.1.1 Simple Remote Connection
Setting parameters for Networking Survivability, assigned to Remote
SIP-MLT—NAT - CWMP Server (HTTP) Port No.
Specifies the outside
-facing HTTP port of the PBX-side network gateway for remote connections that is used
when the gateway specified in Setting parameters assigned to Remote SIP-MLT is not available.
Default
7547
Value Range
1–65535
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Manual References
18.1.1 Simple Remote Connection
Setting parameters for Networking Survivability, assigned to Remote
SIP-MLT—NAT - CWMP Server (HTTPS) Port No.
Specifies
the outside-facing HTTPS port of the PBX-side network gateway for remote connections that is used
when the gateway specified in Setting parameters assigned to Remote SIP-MLT is not available.
Default
37547
Value Range
1–65535
Document Version 2016-03 PC Programming Manual 271
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
To Next Page
Loading...
