Panasonic KX-NS1000 - Page 282

Value Range
1000–60000
(ms)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Maximum Continuous Tone Time
Specifies the length of time of a continuous tone that the PBX will detect as the end of a call.
Default
15000 ms
Value Range
1000–60000
(ms)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Unique Cyclic Tone Detection
Specifies whether the system will detect the end of a call when there is a unique cyclic tone.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration
—Slot—Site Property
Maximum Cyclic Tone Time
Specifies the length of time of a continuing cyclic tone that the PBX will detect as the end of a call.
Default
6000 ms
Value Range
1000–60000
(ms)
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
282 PC Programming Manual Document Version 2016-03
9.5.3 PBX Configuration—[1-1] Configuration—Slot—Site Property—NSVM