Panasonic KX-NS1000 - Page 284

EC Gain
Specifies the Echo Canceller Gain.
Default
3 db
Value Range
-14–6 dB
Maintenance Console Location
9.6 PBX Configuration—[1-1] Configuration
—Slot—UM Card Property
NLP Setting
Specifies the NLP (Non
-Linear Processor) setting to control echo sound quality.
Default
Weak
Value Range
Disable, Weak, Normal, Strong
Maintenance Console Location
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Card Property
FAX Detection Ability
Enables
the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Card Property
CNG Signal Effective Detection Width 1 (ON)
Specifies the length of time that the PBX detects the CNG signal.
Default
500 ms
Value Range
20–5000 ms
284 PC Programming Manual Document Version 2016-03
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Card Property