Panasonic KX-NS1000 - Page 342

Default
20 ms
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
FAX Detection Ability
Enables
the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Programming Manual References
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property—Incoming Call—
Voice
Codec Priority 1st
FAX Sending Method
Specifies the method of transporting the fax signal.
Default
G.711 Inband
Value Range
G.711 Inband, T.38
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Default
No Speed Limit
342 PC Programming Manual Document Version 2016-03
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property