Panasonic KX-NS1000 - Page 343

Value Range
No Speed Limit, 2400 bps
, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
DTMF
Specifies the type of DTMF tone to be sent out.
Default
Outband (H.245)
Value Range
Inband, Outband (RFC2833)
, Outband (H.245)
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Default
101
Value Range
96–127
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Default
512
Value Range
272–512
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Document Version 2016-03 PC Programming Manual 343
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property