Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
Timer
T301
Specifies the maximum time that the PBX waits for a reply after making a call.
Default
1800
Value Range
0–18000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
Default
150
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting) message.
Default
60
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap sending.
Document Version 2016-03 PC Programming Manual 345
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
To Next Page
Loading...
