Panasonic KX-NS1000 - Page 346

Default
300
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC
(disconnection) message.
Default
150
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message.
Default
40
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration
—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T309
Specifies
the length of time after which the PBX tries to disconnect the data link, before disconnecting the call.
Default
120
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
346 PC Programming Manual Document Version 2016-03
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property