Value Range
None, Registered
Maintenance Console Location
9.19 PBX Configuration
—[1-1] Configuration—Slot—V-IPCS4—Port Property
Channel expansion
Specifies whether to expand the number of channels for the IP
-CS. This setting is available only for
KX-NS0154 IP-CSs. This setting will be grayed out if the IP-CS’s port is not set to OUS, or a non-supported
type of IP-CS (e.g., KX-NCP0158) is connected to the port.
Default
KX-NS0154 or when no IP-CS is registered: No
For other IP-CSs: - (hyphen)
Value Range
For KX-NS0154: Yes, No
For other IP-CSs: - (hyphen)
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
MAC Address
Indicates the MAC address of the IP-CS (reference only).
Default
Not applicable
Value Range
00:00:00:00:00:00–
FF:FF:FF:FF:FF:FF
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Current IP Address
Indicates the current IP address of the IP-CS (reference only).
Default
Current IP address
Value Range
1.0.0.0–223.255.255.255
396 PC Programming Manual Document Version 2016-03
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
To Next Page
Loading...
