Panasonic KX-NS1000 - Page 397

Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Program Ver.
Indicates the program software file version of the IP
-CS (reference only).
Default
Not applicable
Value Range
Version number
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Air Sync Group No
Assigns an Air Synchronization Group number to the IP
-CS.
This setting is available only if the IP-CS’s port is set to OUS.
Default
None
Value Range
None, 1–16
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Programming Manual References
19.2.1 PBX Configuration—[11-2-1] Maintenance—CS Synchronization—Air Synchronization
LAN Sync Group No.
Specifies the LAN sync group number when using an IP
-CS (KX-NS0154 only) in a LAN sync group. A
maximum of 64 IP-CSs can be assigned to one group.
This setting is available only if the IP-CS’s port is set to OUS.
Default
1–16 (same as the site number)
Value Range
None, 1–16
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Document Version 2016-03 PC Programming Manual 397
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property