Fault: The port is not communicating with the network.
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
System Speed Dial Download
Specifies if the connected SIP phone will download system speed dial entries from the PBX.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—
System Speed Dial Download
For UT Extensions
SIP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Default
0
Value Range
0–63
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
RTP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Default
0
Value Range
0–63
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
414 PC Programming Manual Document Version 2016-03
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
To Next Page
Loading...
