UT Codec Priority - 1st—UT Codec Priority - 4th
Specifies the priority of the codecs to be used. None is only available for 2nd, 3rd, and 4th priorities.
Default
1st: G.722
2nd: G.711A
3rd: G.711Mu
4th: G.729A
Value Range
G.722, G711A, G.729A, G711Mu, None
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Packet Sampling Time
Specifies
the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Default
20 ms
Value Range
20 ms, 30 ms, 40 ms
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Jitter Buffer - Maximum Delay
Specifies the maximum size of the jitter buffer for voice communications.
Default
20
Value Range
3–50 ms
Maintenance Console Location
9.21 PBX Configuration
—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Jitter Buffer - Minimum Delay
Specifies the minimum size of the jitter buffer for voice communications.
Default
2
Document Version 2016-03 PC Programming Manual 415
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
To Next Page
Loading...
