Protocol for Remote SIP-MLT
Specifies
the protocol to use for remote SIP phone data communication. HTTPS is strongly recommended for
remote SIP-MLT connections.
Default
HTTP
Value Range
HTTPS, HTTP
Note
A total of 20 HTTPS connections can be set per PBX site. If "HTTPS" is selected but the total number of
HTTPS
connections available at the site will be exceeded by changing this setting, a warning message will
be displayed and the setting change will be canceled.
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Feature Manual References
18.1.1 Simple Remote Connection
422 PC Programming Manual Document Version 2016-03
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
To Next Page
Loading...
