Panasonic KX-NS1000 - Page 478

Maintenance Console Location
9.33 PBX Configuration—[1-5] Configuration—DSP Resource
Feature Manual References
5.1.18 DSP Resource Usage
Services—VoIP (G.711)
Specifies the number of simultaneous VoIP calls to reserve DSP resources for.
Default
0
Value Range
0–506 VoIP calls
Maintenance Console Location
9.33 PBX Configuration
—[1-5] Configuration—DSP Resource
Feature Manual References
5.1.18 DSP Resource Usage
Services—Unified message
Specifies the number of UM ports (including a fax port) to reserve DSP resources for.
Default
0
Value Range
0–31 ports (UM: 30 ports, Fax: 1 port)
Maintenance Console Location
9.33 PBX Configuration
—[1-5] Configuration—DSP Resource
Feature Manual References
5.1.18 DSP Resource Usage
Services—Two-way Recording
Specifies
the number of UM ports reserved in
Services—Unified
message to use for Two-way Recording.
Default
0
Value Range
0–30 ports (cannot exceed the value set in
Services—Unified message)
478 PC Programming Manual Document Version 2016-03
9.33.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting