Panasonic KX-NS1000 - 5.6 Fault Recovery;Diagnostics; 5.6.1 UPS (Uninterruptible Power Supply) Integration

Dial—Extension Inter-digit
Specifies the length of time within which subsequent digits must be dialed before the PBX sends a reorder
tone.
Default
10
Value Range
1–250 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Feature Manual References
2.1.5 Automatic Extension Release
Dial—Analogue CO First Digit
Specifies the length of time within which the first digit of a telephone number must be sent to an analog CO
line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops muting the
caller’s voice over the analog CO line.
Default
10
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Dial—Analogue CO Inter-digit
Specifies the length of time within which subsequent digits of a telephone number must be sent to an analog
CO line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops muting the
caller’s voice over the analog CO line.
Default
5
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
494 PC Programming Manual Document Version 2016-03
10.3 PBX Configuration—[2-3] System—Timers & Counters