Dial—Analogue CO Call Duration Start
Specifies the length of time between the end of dialing and the start of the SMDR timer for outgoing analog
CO line calls.
Default
0
Value Range
0–60 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Intercept Routing No Answer (IRNA)—Day, Lunch, Break, Night
Specifies the length of time until an unanswered CO line call is redirected to the intercept routing destination
in each time mode.
Note
that this setting is only valid for extensions whose
Intercept No Answer Time—Day, Lunch, Break,
Night is set to "0".
Default
40
Value Range
1–240 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Intercept No Answer
Time—
Intercept No Answer Time—Day, Lunch, Break, Night
Feature Manual References
10.1.12 Intercept Routing
Recall—Hold Recall
Specifies the length of time until the holding extension receives a Hold Recall ring or alarm tone when a held
call remains unretrieved.
Default
60
Document Version 2016-03 PC Programming Manual 495
10.3 PBX Configuration—[2-3] System—Timers & Counters
To Next Page
Loading...
