2. Break—Break 1–3 End—Hour, Minute
Specifies the end time for each break period. Times can only be set when
2. Break—Break 1–3
Start—Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table
—Time Setting
Feature Manual References
19.1.2 Tenant Service
19.1.3 Time Service
Document Version 2016-03 PC Programming Manual 515
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting
To Next Page
Loading...
