Panasonic KX-NS1000 - Page 514

Value Range
00:00–23:59
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table
—Time Setting
Feature Manual References
19.1.2 Tenant Service
19.1.3 Time Service
2. Break—Break 1–3 Start—Setting
Enables the setting of the start time for each break period.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table
—Time Setting
Feature Manual References
19.1.2 Tenant Service
19.1.3 Time Service
2. Break—Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when 2. Break—Break 1–3
Start—Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table
—Time Setting
Feature Manual References
19.1.2 Tenant Service
19.1.3 Time Service
514 PC Programming Manual Document Version 2016-03
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting