Panasonic KX-NS1000 - Page 534

Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Default
Not stored
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main
Message Waiting Set / Cancel / Call Back
Specifies the feature number used to set or cancel Message Waiting, or call back the caller.
Default
*70
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main
Feature Manual References
13.1.3 Message Waiting
FWD/DND Set / Cancel: Call from CO & Extension
Specifies the feature number used to set or cancel FWD/DND for incoming CO line and intercom calls.
Default
*710
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main
534 PC Programming Manual Document Version 2016-03
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main