Panasonic KX-NS1000 - Page 590

Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters— Automatic Redial—Redial
Call Ring Duration
Feature Manual References
17.1.1 Redial, Last Number
Redial—Save Dial After Connection to Redial Memory
Specifies whether any digits dialed after the called party answers (for example, to access a specific extension
within another company) are also saved as part of the redial number.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
17.1.1 Redial, Last Number
Redial—Call Log by Redial key
Enables display of the Outgoing Call Log on a display PT by pressing the REDIAL button while on hook.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
17.1.1 Redial, Last Number
Extension - CO Call Limitation—For Incoming Call
Selects
whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both outgoing
and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned
on a trunk group basis.
Default
Disable
590 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options