Panasonic KX-NS1000 - Page 589

CODEC—Priority Notification from SIP Network (for Incoming Call)
Specifies
whether the priority notification from the SIP network is used in place of the PBX’s codec priority for
SIP CO lines.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
Specifies whether to automatically send
"#" as an end code when dialing to an ISDN line; if used as the end
code, "#" will not be dialed out as part of a number even when the "#" key is pressed.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting—
ISDN Outgoing
Call Type
Feature Manual References
10.1.18 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Redial—Automatic Redial when No Answer (ISDN)
Selects
whether Automatic Redial to an ISDN line is performed when the called party does not answer within
a pre-programmed time period.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Document Version 2016-03 PC Programming Manual 589
10.9 PBX Configuration—[2-9] System—System Options