Panasonic KX-NS1000 - Page 604

Feature Manual References
22.1.5 Whisper OHCA
Call Waiting—Automatic Call Waiting for Extension Call
Selects
whether Busy Station Signaling (BSS) is automatically performed when an extension user calls a busy
extension.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
4.1.11 CALL WAITING FEATURES
Busy Out—Busy Out for Analogue CO
Enables the PBX to automatically set a CO line to Busy Out status when a loop current is not detected,
preventing that CO line from being used.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
PT Feature Access—No. 1–8
Specifies the System Feature Access Menu (1–8) shown on the display of an extension.
Default
No. 1: Call Back Cancel
No. 2: Call Pickup Direct
No. 3: Call Pickup Group
No. 4: DOORPHONE Call
No. 5: Door Open
No. 6: External BGM
No. 7: Paging
No. 8: Relay On
604 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options