Panasonic KX-NS1000 - Page 605

Value Range
None, Call Back Cancel
, Call Pickup Direct, Call Pickup Group, DOORPHONE Call, Door Open, Relay On,
External BGM, Paging
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for networks
that disconnect a call if an alert message is not received.
Default
Mode1
Value Range
Mode1: Disable
Mode2: Enable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
ISDN Option—Calling Party Name Presentation to PRI23
Specifies whether the name of the calling party is displayed when making a call to the ISDN network.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
ISDN Option—Calling Party Name Sending Format
Specifies the sending format of the calling party name when making a call to the ISDN network.
Default
Facility
Value Range
Display, Facility
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Document Version 2016-03 PC Programming Manual 605
10.9 PBX Configuration—[2-9] System—System Options