Panasonic KX-NS1000 - Page 608

Default
1
Value Range
0–10
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
4.1.24 CTI (Computer Telephony Integration)
CTI Make Call—SLT Ring
Specifies whether to ring an SLT when a call is made from CTI, instead of the SLT.
Default
Enable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
CTI Hold—Forced Idle when Hold by PDN/SDN Key
Selects whether to force an extension to become idle while having a call held on a PDN/SDN button.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration
—[2-9] System—System Options
Feature Manual References
15.1.4 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
Option 7
Incoming Call Log—Busy/Intercept (when Called Party is Busy)
Specifies whether the following types of calls are recorded in the incoming call log of the original destination.
• Calls received when the extension is busy.
608 PC Programming Manual Document Version 2016-03
10.9 PBX Configuration—[2-9] System—System Options