Panasonic KX-NS1000 - Page 609

• Calls rerouted via the Intercept Routing—Busy feature.
If this setting is enabled, calls are recorded as "Not Answered".
Default
Enable (Not Answered)
Value Range
Enable (Not Answered), Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
4.1.5 Call Log, Incoming
Incoming Call Log—Fwd All/Fwd Busy
Specifies whether the following types of calls are recorded in the incoming call log of the original destination.
• Calls rerouted via the FWD—All Calls feature.
• Calls rerouted via the FWD—Busy feature.
If this setting is enabled, calls are recorded as
"Not Answered".
Default
Enable (Not Answered)
Value Range
Enable (Not Answered), Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Manual References
4.1.5 Call Log, Incoming
Incoming Call Log—Call Pickup
Specifies
how calls answered using the Call Pickup feature are recorded in the incoming call log of the original
destination.
Default
Answered
Value Range
Answered, Not Answered
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Document Version 2016-03 PC Programming Manual 609
10.9 PBX Configuration—[2-9] System—System Options