Panasonic KX-NS1000 - Page 795

Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Default
1
Value Range
1–96
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension
—Portable Station—Flexible Button
Feature Manual References
4.1.16 CO Line Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking zone.
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension
—Portable Station—Flexible Button
Feature Manual References
4.1.7 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the PS belongs to are logged in to or logged out from.
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the PS belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension
—Portable Station—Flexible Button
Document Version 2016-03 PC Programming Manual 795
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button