Feature Manual References
10.1.3 ICD Group Features—Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
Value Range
All (Day/Night/Lunch/Break),
Day/Night/Break, Day/Night/Lunch, Day/Night
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Manual References
19.1.3 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Default
Level 1
Value Range
Level 1–Level
7
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Manual References
19.1.5 TRS (Toll Restriction)
5.1.6 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the
Time Service Switching Mode is set to Automatic.
Default
Table 1
Value Range
Table 1–Table 32
796 PC Programming Manual Document Version 2016-03
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button