Panasonic KX-NS1000 - Page 915

Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Communication—Word Length
Specifies the number of bits in each byte of a character.
When connecting the Maintenance Console to the PBX using an RS-232C cable, assign the following values
to the Serial Interface (RS-232C) port of the PBX:
Word Length: 8 bit, Parity Bit: None, Stop Bit: 1 bit
Notice
Do not use the following combinations:
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
• Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
8 bit
Value Range
7 bit, 8 bit
Maintenance Console Location
19.1 PBX Configuration
—[11-1] Maintenance—Main
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Communication—Stop Bit
Selects a stop bit code that indicates the end of a bit string which composes a character.
Select an appropriate value depending on the requirements of the printer or personal computer.
Default
1 bit
Value Range
1 bit, 2 bit
Maintenance Console Location
19.1 PBX Configuration
—[11-1] Maintenance—Main
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Document Version 2016-03 PC Programming Manual 915
19.1 PBX Configuration—[11-1] Maintenance—Main