Panasonic KX-NS1000 - Page 914

Programming Manual References
19.1 PBX Configuration—[11-1] Maintenance—Main—RS-232C— Communication—Flow
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Communication—Parity Bit
Selects a parity bit code that indicates what type of parity is used to detect an error in the string of bits composing
a character.
Make an appropriate selection depending on the requirements of the printer or personal computer.
Default
None
Value Range
None, Mark, Space, Even, Odd
Maintenance Console Location
19.1 PBX Configuration—[11-1] Maintenance—Main
Feature Manual References
18.1.6 SMDR (Station Message Detail Recording)
Communication—Flow
Enables the hardware flow control.
Default
None
Value Range
None, Hardware
Maintenance Console Location
19.1 PBX Configuration
—[11-1] Maintenance—Main
Communication—NL Code
Specifies the NL (New Line) code for the printer or personal computer.
If
the printer or personal computer automatically feeds lines with a carriage return, select CR (Carriage Return).
If not, select CR + LF (Line Feed).
Default
CR + LF
Value Range
CR + LF, CR
914 PC Programming Manual Document Version 2016-03
19.1 PBX Configuration—[11-1] Maintenance—Main