Embroidery Stitch-Out
Change Thread
When it is time to change the upper thread, the machine
will stop. Change the spool of thread and re-thread the
machine. The recommended thread color number is
shown in the pop-up message.
Cut and Remove the Thread Tail
After changing the thread, the machine will sew a few
stitches and then stop so you can cut the thread tail.
Note: When Automatic Thread Cutter and Automatic Jump
Stitch Trim function is selected in Temporary Embroidery
Settings, the thread will be cut automatically and no cut
thread tail pop-up will be shown. Simply remove the thread
tail that has been cut.
Your Embroidery is Finished
A pop-up message and sound informs you that your
embroidery is finished. When the pop-up is closed the
design will stay loaded in Embroidery Stitch-Out and
you can stitch the same embroidery again, including
any changes you have made.
148
To Next Page
Loading...
