Promise Technology VTrak M610i User Manual

Chapter 4: Management with WebPAM PROe
91
Managing Controllers
The RAID controller is are the heart of the VTrak subsystem. Controller
Management includes the following functions:
• Viewing the Controller (page 91)
• Locating a Controller (page 91)
• Viewing Controller Information (page 92)
• Viewing Controller Statistics (page 93)
• Making Controller Settings (page 93)
Viewing the Controller
To view information about the controller:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
The controller information appears under the Information tab in Management
View. Controller information includes:
• Controller ID (1)
• Alias, if assigned
• Model, if applicable
• Status – OK means normal
• Readiness Status – Active or Standby
• Locate – Click the button to locate the controller. See below
VTrak subsystems, such as the M610i, M310i, and M210i, with only one
controller will always show that the second controller is “Missing.”
Locating a Controller
To identify a specific controller in the VTrak subsystem:
1. Click the Subsystem icon in Tree View.
2. Click the Controllers icon.
3. In Management View, click the Locate Controller button.
4. The Controller Dirty Cache LED and Status LED, on the back of the
Controller, will flash for one minute. See the illustrations below.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English