Promise Technology VTrak M610i User Manual

VTrak M610i, M310i, M210i Product Manual
168
Making Node Settings
These settings affect both VTrak iSCSI data ports.
Note that Header and Data Digest work best with initiators that have a TCP
Offload Engine (TOE).
To make iSCSI node settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Node and press Enter.
Node information appears.
3. Highlight iSCSI Node Settings and press Enter.
This screen enables you to make iSCSI Node Settings.
4. Highlight the items you want and press the backspace key to erase the
current value, then type the new value:
• Node Name
• Node Alias – Maximum of 32 characters. Use letters, numbers, space
between words and underscore. An alias is optional.
• Outstanding R2T
• Maximum Burst Length
• Default Time to Wait
• Default Time to Retain
5. Highlight the items you want to set and press the spacebar to toggle
between Enabled and Disabled:
• Header Digest
• Data Digest
• Unidirectional CHAP Authorization
• Bidirectional CHAP Authorization
6. Press Ctrl-A to save your settings.
Viewing Target Port Information
To view iSCSI port target information:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
3. Highlight Target Port 1 or Target Port 2 and press Enter.
Port information appears.

Promise Technology VTrak M610i Specifications

General

Brand	Promise Technology
Model	VTrak M610i
Category	Network Storage Server
Language	English